This steam condenser fits ths steam hat and uses cold water to cool the steam until it becomes a liquid that runs out of the condenser to a bucket or directly to the drain. The unit is an excellent alternative to a ventilation system.
Description - Brewtools steam condenser
This steam condenser fits ths steam hat and uses cold water to cool the steam until it becomes a liquid that runs out of the condenser to a bucket or directly to the drain. The unit is an excellent alternative to a ventilation system.
The unit ships with a nozzle that supplies 1.1 liters of water per minute at 4 bar pressure. We also offer other nozzles that offers higher or lower flow depending on the water pressure where the system is used and other factors (sold separately).
Included in the box:
- TC 4" to TC 2" adapter (1 pcs)
- 20 cm straight TC 2" pipe (2 pcs)
- TC 2" Tee (1 pcs)
- TC 2" Elbow (1 pcs)
- TC 2" 1/8" nozzle adapter with TC 34 mm input (1 pcs)
- TC 2" to 19mm hose barb adapter (1 pcs)
- TC 2" Clamp (6 pcs)
- TC 2" Gasket (6 pcs)
- 1/8" BSP-T nozzle, 30 degrees, 1.1 liters per minute @ 4 bar (1 pcs)
You also need:
- Steam hat for your system
- TC 4" Clamp and gasket
- Water inlet adapter (TC 34 mm to hose or garden connector etc)
- Outlet tube (16 x 25 mm)
- A TC 34 mm elbow is recommended for the water inlet
Specifications
Dimensions (incl. Packaging)
- Width
- 10.00 cm
- Height
- 20.00 cm
- Length
- 20.00 cm
- Weight
- 1.00 kg